ANNABEE - 2025 40' 6" VALHALLA BOATWORKS V-41
Palm Beach Florida United States
$1,195,000 USD

• Quad Mercury Verado V10 400 outboards with MTU EPC until 7/15/30 or 4000 Hours
• Fusion White engine finish
• Upgraded Mercury electric steering
• Mercury Joystick Piloting
• Zipwake trim tab system
• Bow thruster
• Seakeeper SK3 gyro stabilizer with Platinum Warranty until 7/15/30 or 4000 Hours
• Reverso automatic engine flush system

• Kingston Grey gelcoat hull sides
• Custom Boot Stripe
• Port-side dive door
• Faux teak toe rail
• Polished aluminum bow handrail recessed into deck coaming
• Stainless-steel anchor chute through stem
• Stainless-steel claw anchor
• Windlass
• Removable stainless-steel dive ladder with storage bag
• Dedicated dive ladder storage in lazarette
• Dam installed for 2kW transducer
• Dam installed for 10" recessed deck plate in Seakeeper hatch
• (4) Underwater lights

• Release Marine teak helm pod
• ProCurve solid curved-glass helm enclosure
• Flush-mounted lighted compass
• Black acrylic helm panel for flush-mounted electronics
• Edson polished stainless-steel steering wheel with power knob
• Recessed fiberglass helm footrest with storage
• Molded console vanity with freshwater sink
• Retractable shower wand
• Fiberglass entry door into console
• Heavy-duty locking console door hardware
• Dedicated electrical-panel access door for helm and electronics
• (4) Flush-mounted helm cup holders
• Port and starboard glove boxes
• USB charging outlets
• 12V power outlets at helm and inside console
• Prep for PBT tower

• Odyssey MG31 batteries
• Dedicated battery for each engine
• Additional house batteries
• Additional Odyssey MG31 battery
• Battery distribution panel
• Battery cutoff and charging-system breakers
• Battery voltage and amperage monitoring
• (2) 40-amp battery chargers
• 50' shore power cord
• Color-coded, labeled and numbered wiring system
• BocaTech 12V switching system with backlit switch labels
• Anchor and navigation lighting
• Lighting in lazarette, under gunwales and inside console
• Additional lighting in deck and coaming storage boxes
• Bulkhead-style horn mounted forward

• (2) Aft 2,000 GPH bilge pumps with automatic and manual operation
• Midship bilge pump with automatic and manual operation
• High-water alarm
• Arid dry bilge system
• Automatic sump box inside console mechanical space
• Whale Gulper pump mounted midship
• DC pressurized freshwater system
• PEX freshwater plumbing
• Freshwater fill located at console
• Freshwater washdown beneath gunwale
• Freshwater washdown in anchor locker
• Saltwater washdown system
• Electric freshwater head
• Holding tank with deck pump-out fitting
• Macerator pump for holding tank
• Y-valve for holding-tank overboard discharge

• Fuel manifold system
• Selector system allowing engines to draw from multiple fuel tanks

• Hooker SeaChest 4500 livewell system
• High-speed livewell pickup
• Livewell controls at helm
• Transom livewell
• Clear transom livewell lid
• Port and starboard insulated aft fish boxes
• Fish-box discharge system to aft lazarette
• Forward fish box
• Port and starboard forward deck lockers
• Automatic sump drainage for forward fish box and deck lockers
• Fiberglass under-gunwale forward side storage lockers
• Port and starboard side storage lockers
• In-deck fish box and storage
• 12V electric reel outlets
• Bluewater deck plate and rocket launcher

• Integrated G.G. Schmitt folding transom seating
• Helm seating module with mezzanine bench
• Integrated armrests
• Tackle storage
• Integrated cooler
• Refrigerated aft-facing mezzanine bench seat
• (3) Release Marine 19" teak helm chairs
• Electric helm-chair slides
• Flip-up bolsters
• Four-armrest configuration
• Forward bench seating modules with backrests
• Release Marine upgraded teak forward-seat backrests
• Plano storage integrated into seating backrest
• Flush-mounted armrests in forward lounge
• Padded cockpit coaming bolsters

• Upgraded premium upholstery throughout seating and coamings
• Diamond/Bentley-pattern stitching
• Capriccio Cloud main upholstery
• Textil Cloud inset upholstery
• Capriccio Cadet Grey piping
• Custom grey stitching
• Costa Marine package for console, lounge and helm seating
• Costa Marine forward seating module covers
• Costa forward lounge seating armrests
• Costa engine covers

NAVIGATION & HELM:

• Garmin GPSMAP 9222 22" multifunction display
• (2) Garmin GPSMAP 8616 16" multifunction displays with preloaded charts
• Garmin GPSMAP 8610 multifunction display at tower
• Garmin BlueNet 20 network switch
• Garmin BlueNet 30 network gateway
• Garmin USB card reader
• Custom electronics installation with displays integrated at helm

RADAR:

• Garmin GMR 1234 xHD3 12kW radar
• 4' open-array radar antenna

SOUNDER:

• Garmin GSD28 sounder
• Airmar R109LHW 2kW transducer

AUTOPILOT:

• Garmin Reactor 40 autopilot
• Garmin GHC 50 autopilot control display

AIS:

• Garmin AIS 800 transceiver
• Garmin GA38 GPS/GLONASS antenna

VHF COMMUNICATIONS:

• (2) Icom M510 EVO VHF marine radios
• (2) Shakespeare Phase III 8' VHF antennas
• Icom HM-195 CommandMic IV at tower

WEATHER:

• Garmin GXM54 satellite weather antenna

SATELLITE INTERNET:

• Starlink Standard V4 satellite internet system
• Gen 3 Starlink router
• KVH Starlink mobility mount

VESSEL TRACKING:

• Nautic Alert Triton vessel tracking system

FUSION / JL AUDIO SYSTEM:

• Fusion Apollo MS-RA770 touchscreen marine stereo
• Apple AirPlay connectivity
• SiriusXM satellite radio
• SiriusXM antenna
• AM/FM antenna
• JL Audio marine amplification
• (4) JL Audio M6 8.8" marine speakers
• (2) Anchor locker
• (2) Forward helm-seat area
• (2) JL Audio M6 7.7" marine speakers at side posts
• (4) JL Audio M6 7.7" marine speakers in hardtop
• (2) Forward
• (2) Aft
• (4) JL Audio M6 10" marine subwoofers
• (2) Anchor locker
• (2) Forward-facing helm-seat area
• Dedicated JL Audio amplifiers
• Custom subwoofer wedges

VIDEO & MEDIA:

• Roku Ultra media player
• Roku mounting system
• AVPro HDMI distribution system
• Video display capability integrated into Garmin helm displays

TOWER ELECTRONICS:

• Garmin GPSMAP 8610 multifunction display
• Icom HM-195 CommandMic IV
• VHF command-mic extension

• Hardtop speakers custom painted Kingston Grey

• PBT molded hardtop with tower-style aft legs and upper station
• Polished tower pipe
• Folding tower configuration
• Molded fiberglass tower sunshade
• Tower sunshade frame finished in satin Kingston Grey
• Underside of hardtop and tower sunshade finished in gloss Kingston Grey
• Molded radar pod
• Flush electronics mounting surfaces
• ProCurve glass windshield integration
• Fiberglass upper control box with satin-black helm surface
• Compass at upper station
• Custom control-box cover
• Integrated Starlink mounting plates in tower sunshade

• Mercury electronic controls for quad V10 400 outboards
• Mercury electric steering
• Mercury engine display
• Mercury start/stop controls
• Mercury Joystick Piloting
• Zipwake trim-tab controls
• Side-Power bow-thruster control

• Gemlux Bluewater 22' carbon-fiber outriggers
• Clear-coated carbon-fiber poles
• Gemlux stainless-steel outrigger bases
• Custom molded outrigger wedges
• Hardtop-mounted outrigger installation

• (4) Recessed Lumitec Spectrum color-changing hardtop lights
• (2) Lumitec Spectrum color-changing lights beneath tower sunshade
• Forward Lumitec spreader light
• Aft Lumitec spreader light
• (3) Forward-facing Lumitec Razor LED light bars
• LED masthead/anchor light
• Molded port, starboard and stern navigation lights

• Tower bench seat
• Custom cushion matched to vessel upholstery

• (4) Rod holders welded to aft side of hardtop
• (4) Rod holders integrated into aft main tower legs with steps
• (4) Rod holders integrated into aft inner tower legs
• Manual Birdsall teaser reels recessed into underside of hardtop

• Molded speaker recesses integrated into hardtop
• Aft hardtop speaker mounting rings
• Forward speakers integrated into electronics-box edge

• BlueWater Chairs custom curved teak rocket launcher
• (8) Stainless-steel screwless rod holders
• Integrated rigging tray
• Integrated storage drawer
• Non-skid rigging surface
• Stainless-steel cup holders
• High-gloss teak finish
• Stainless-steel pedestal and deck plate
• Fixed offset pedestal
• Flush-mounted pedestal base
• Custom fitted rocket-launcher cover with Evolution lining